Product Features

First impressions do matter, and that is why we designed the Giant Fountain line. This product is often specified by landscape architects for premier locations whenever a dramatic focus to a water feature is desired.  Resorts, amusement parks, and corporate headquarters around the world select these systems based on their beauty, versatility and quality. 

• Unique Launching System: 
  Wheeled launching system eliminates the need for cranes during installation in most applications.
• Adjustable Float: 
  Float ballasts allow you to adjust for level flotation and float visibility in the water.
• Corrosion Resistant: 
  Able to operate in brackish conditions.
• Comprehensive Warranty: 
  All-inclusive 2-year warranty or extended 3-year warranty with Sub-Monitor motor control option, on unit, cable and power control center*.
• Safety Listed & Protected:  
  Package electrically safety tested and listed with ETL, ETL-C.
• Shallow Operating Depth: 
  Horizontal platform allows operation in6ft or 2m of water.
• Complete Package: 
  Includes unit, panel* and cable with cable quick disconnect for ease of installation.
• Optional Accessories: 
  Fountain Glo High Voltage and Par 64 light sets,wind controls, and sub-monitor motor controls for increased motor life.

*Power control center is not a standard item on 50Hz packages.

Product Specifications:

50Hz	10 HP	15 HP	25 HP
Spray Height (m)	11.6	14.3	18.9
Spray Diameter (m)	1.8	1.8	1.8
m3/hr	102.2	113.5	181.6
Voltage/Phase/Amp 2875rpm@50Hz	400/3/16	400/3/24	400/3/40

Unit shipped complete with unit, cable and Power Control Center. 50Hz applications do not receive a Power Control Center. Unit average weight is between 900-950 lbs or 410-435 kg. Minimum operating depth is 6ft or 2m. Pumping rates represented as GPM or m3/hr and may vary due to voltage, elevation and relative humidity.

Unit & Float Construction

The Giant Fountains have been designed and engineered by expert craftsman to provide a high quality, reliable product. Incorporating a Franklin "Super Stainless" motor and multi-staged stainless steel pump, manufactured by Grundfos the world leader in pumps, you can expect years of dependable service.

• Corrosion Resistant Materials: 
  All components are manufactured of stainless steel, brass or thermoplastics and can be used in brackish waters.
• Improved Handling: 
  Unique wheeled launching systemeliminates the need for cranes during installation in most applications.
• Adjustable Float: 
  Once installed the high-density polyethylene float can easily be adjusted to minimize float visibility in the water.

Product Installation

Giant Fountain Mooring
 

Installation of the Giant Fountain will require partial assembly of the unit and the services of a certified electrician. Tools and materials required can include: a shovel (to bury/trench cable,) conduit, stainless steel cables, boat, crane (depending on landscaping), rebar or duckbill anchors, 1/2in ratchet wrench, 9/16in wrench and socket set. Complete installation instructions will be found within the Giant Fountain owner's manual which will be provided with the delivery of the product.

To receive a Giant Fountain the facility should be equipped with a loading dock and fork lift. Average weight of shipment will range between 900-950lbs or 410-435kg.

Basic Installation Guidelines:

• Unit Assembly: Unit will be shipped partially assembled with only minor assembly required for float assembly and mounting float to unit. Depending on horsepower and pattern selection some additional assembly may be required. While typical packaging has the unit crated, it may arrive in several cartons depending on options selected and cable lengths. All hardware is provided. Estimated time to assemble unit is 3 hours.
• PCC Installation: Qualified electrician will need to be on-site to install power control center (PCC is standard for all domestic/60Hz applications.)
• Power Cable:  Power cable should be buried or trenched in conduit per local codes, and run at least 3ft or 1m out into the pond/basin. If a cable quick-disconnect is not ordered with the Giant Fountain, electrician/installer will be required to splice cable to unit.
• Launch Unit into Water: With the four rugged polyurethane wheels attached to the frame, the Giant Fountain can be rolled or wrenched along the ground and launched into the water. Using a boat launch or manmade ramp can ease this process. While a crane or hoist can simplify the installation process, many successful installations and retrievals have been done using a ramp/truck/liftgate method. Ponds with steep banks will require a crane.
• Adjust Flotation: Various float sections have marine plugs that allow you to adjust buoyancy and float level if necessary.
• Secure into Place: The unit features a 3-point mooring system with eye bolts provided on the frame. Otterbine recommends the use of 3/16in diameter stainless steel cables for mooring lines. Mooring the unit can often be done from the shoreline, but a boat will assist in the process.

Allow 4-6 hours, with a two to three man crew to install, set the unit in the water and adjust buoyancy.

Warranty

Otterbine offers and exceptional two year warranty on the Giant Fountain line, but can be extended to three years with the purchase of the Sub-Monitor motor control option. This warranty extends to the complete package including the unit, cable and power control center.

Warranty and service work can be performed by more than 100 factory trained and certified Otterbine Service Centers found worldwide, or by Otterbine directly. A copy of the warranty statement for this product can be found within the owner's manual.

Maintenance:

No routine maintenance is required. Unit maintenance is very simple as the motor is a high speed water lubricated motor and there will be no need to change oil or for annual maintenance. When the screen becomes clogged it will be necessary to clean it and can be cleaned with a wire bristle brush. All units have a basket type screen that can be easily removed and cleaned while the fountain is in place.

Winterization:

Giant Fountains must be removed in climates that experience cold winters and frozen waters before lakes freeze over. The motor and pump must be stored in a heated area that stays above 32^o Fahrenheit or 0^o Celsius.