FEATURES

• (2) ½ Hp Vertex HighFlow™ Series
• 11.2 Total CFM, 25 PSI, 115v or 230v
• Highest flow rate of any compressor in its class
• Thermal overload protection
• 2-4 year extended duty cycle between scheduled maintenance
• Full two-year Vertex warranty

(2) 1/2hp, 115v, 11.2 Total CFM. 25 PSI, single phase, twin cylinder piston type compressors. Also available in 230 volt 50 & 60 Hz. UR, CE, CSA listed and built for continuous 24/7 operation. Super-duty Brookwood HighFlow™ compressors incorporate upgraded rotors, stators, bearings and capacitors and are thermally protected, oil-free, and require no lubrication; just periodic replacement of air filter. Extended duty cycle is approximately 2 to 4 years for compressor service, about 2 to 4 times the duty cycle of ordinary piston and rotary vane compressors. All new Brookwood HighFlow™ compressor systems carry a two year warranty.

 FEATURES

• Class "A" GFCI protection on all 115V systems
• Includes SafeStart™ technology allowing full pressure compressor restarts without motor damage
• Powder coated aluminum for a durable attractive finish
• Redundant cooling system with (2) high capacity 290 CFM cooling fans
• Easy access design with barrel lock for security
• Easy plug-in connection to waterside electrical service
• Heavy duty light weight mounting pad included
• Limited lifetime warranty against rust
  
  

Enclosure comes equipped with barrel lock for security, fully gasketed and constructed of aluminum with gray electrostatically-bonded powder coating to provide lifetime warranty against rust. Enclosure furnished with stamped ventilation grill to insure forced air circulation and an integral redundant cooling fan with thermal protection, producing 580 CFM to guard against excessive compressor operating temperatures. This system is equipped with Vertex SafeStart™ technology allowing auto restart under maximum rated pressure without motor damage. Cabinet provided with HDPE mounting pad (24" x 24" x 2"). 115 volt enclosures come equipped with class A GFIC circuit protection for all electrical components. 230 volt systems require the purchaser to provide GFIC protection on their electrical supply circuit.

FEATURES    

• Pumping capacity up to 39,800 GPM
• Huge 5.4 ft2 lifting surface
• Four XL5 AirStations each with five self-cleaning, low maintenance flexible membrane disks
• StableTrak™ technology stabilizes air column increasing lift velocity
• FlowControl™ technology equalizes airflow to all diffusers on uneven bottoms
• Five-year warranty

Four air diffusers each consisting of five self-cleaning, 9" diameter, flexible membrane disks of EPDM compound with 100% rebound memory producing millions of fine 500 to 3000 micron bubbles. Includes FlowControl™ technology that equalizes airflow to all diffusers on uneven bottoms and StableTrak™ technology which stabilizes the bubble column increasing pumping velocity. Base unit is vacuum formed HDPE plastic, sonic spot-welded to provide unit integrity. Base unit (28.0"L x 28.0"W x 10.5"D) has a hollow chamber design for the addition of inert pea gravel ballast and has a lipped design to prevent settling into soft bottom sediments.

FEATURES

• Over-sized 0.58” ID for high flow rates
• Heavy duty wall thickness (0.235") for durability
• Suitable for use with all Vertex AirStations™
• 15-year Vertex warranty
• Self-weighted for fast & easy installation
• Available in 100 and 500 feet increment

Self-weighted, direct burial submersible tubing for connection from compressor to diffuser stations. Tubing is flexible PVC composite construction for use with standard PVC solvent weld cement and 0.5" insert fittings. Tubing has a smooth walled, 0.58" I.D. for extra high flow rates with minimum pressure loss to reduce backpressure and extend compressor life. 0.235" tube wall thickness provides long-term durability and protection against kinking and punctures. BottomLine^TM tubing remains flexible in cold temperatures allowing for easy year round installations.